Dodge Monaco Features, Photos and Videos

The Dodge Monaco is an automobile that was marketed by the Dodge division of Chrysler Corporation. Introduced as the flagship of the Dodge product line, the Monaco was introduced for 1965 to replace the Custom 880, later superseding the Polara model line. During its production, the Monaco was offered in multiple body configurations, including two-door and four-door hardtop sedans, four-door sedans, two-door convertibles, and station wagons.

From 1965 to 1977, three generations of the Monaco were produced with the full-size Chrysler C platform. For 1977 and 1978, Dodge shifted the Monaco to the intermediate Chrysler B platform, effectively downsizing the model line. For 1979, the model line was redesigned and renamed the Dodge St. Regis.

After a 12-year hiatus, the full-size Monaco was revived for 1990 as the flagship Dodge sedan, replacing the Diplomat. A rebadged version of the AMC-developed Eagle Premier, the Monaco was replaced by the Dodge Intrepid for 1993.

On introduction on September 25, 1964, for the 1965 model year, the Dodge Monaco was intended to compete with the Pontiac Grand Prix in what came to be known as the personal luxury market, but ended up filling in for Dodge in the full-size, luxury line instead.

The 1965 Monaco was based on the Custom 880 two-door hardtop body. The Monaco received special badging, different taillight and grille treatment, and a sportier interior with a full-length center console, as well as a 383 cu in (6.28 L) 325 hp (242 kW) V8 engine as standard equipment. Larger, more powerful engines were also available as options. The Monaco competed with the Ford LTD, a top-of-the-line model in the Galaxie 500 series, the Caprice package for the Impala Sport Sedan, as well as the 1966 Plymouth VIP model for its Fury series and the Ambassador DPL offered by American Motors. These models provided competition for mid-priced sedans like Chrysler, Oldsmobile, Buick, and Mercury.

In Canada, a version of the Plymouth Sport Fury was marketed as the Dodge Monaco. It was available in hardtop coupe or convertible body styles. The Canadian Monacos were equipped with Plymouth dashboards in 1965 and 1966. Unlike the U.S. Monaco versions, the Canadian Monaco were available with a 318 cu in (5.21 L) V8 or the slant six.

For 1966, in the U.S., the Monaco replaced the Custom 880 series and the former Monaco became the Monaco 500. The basic Monaco was available in hardtop coupe, four-door (pillarless) hardtop sedan, conventional four-door (pillared) sedan, and four-door station wagon bodystyles. In the U.S., the Monaco 500 was available only as a hardtop coupe. Although there was no convertible in the 1966 U.S. Monaco range, there was in the 1966 Canadian Monaco lineup. The Canadian Dodge hung onto the "Monaco" name for the Sport Fury equivalent and Polara 880 for the Fury III competitor.

For 1967, all full-sized Dodges, the Monaco included, received a significant facelift with all-new exterior sheet metal. Chief designer Elwood Engel's work featured generally flat body planes with sharp-edged accent lines. The hardtop coupes got a new semi-fastback roofline with a reverse-slanted trailing edge on the rear quarter window.

In Canada, the Monaco name was applied for 1967 to all of the premium full-sized Dodge cars, replacing the Polara 880 at the top of the Dodge line. Taking the Monaco's place as a premium full-size model was the Monaco 500, which was available only as a two-door hardtop and convertible.

Changes were minimal for 1968. The Monaco 500 was dropped at the end of the 1968 model year in the United States and at the end of the 1970 model year in Canada.

For the 1969 model year, the wheelbase of the Monaco was increased from 121 inches to 122 inches, and the length was increased to about 220 inches. Returning for 1969 was the "500" option, which in the U.S. market gave the Monaco front bucket seats and a center armrest. In Canada, the Monaco 500 was a separate series that used the side trim of the Polara 500 sold in the U.S. Canadians could also buy a Monaco convertible; U.S. Dodge full-size convertible shoppers had only the lower-end Polara and Polara 500 to choose from.

All full-sized Dodge cars including the Monaco adopted Chrysler Corporation's new "fuselage" styling, in which the upper and lower body are melded into a uniformly curved unit. Curved side glass adds to the effect, as does the deletion of the "shoulder" along the rear. The look starts in the front of the car, with a nearly straight-across bumper—demanded by a Chrysler executive after a Congressional committee attacked him over the seeming inability of car bumpers to protect cars from extensive damage in low-speed collisions—and a five-segment eggcrate grille that surrounds the headlamps. When the cars failed to spark buyers' interest, Dodge executives demanded a change. By the summer of 1969, the division released new chrome trim for the front fender caps and leading edge of the hood as an option, which gives the appearance of a then-fashionable loop bumper without the tooling expense. At the rear, Dodge's signature delta-shaped taillamps were presented in a new form that required the top of the bumper to slope downward toward each end.

The standard-equipment engine on the 1969 Monaco is Chrysler's 245-horsepower (183 kW) B-block 383 cu in (6.3 L) V8 engine with a two-barrel 2245 Holley carburetor. Buyers could order the 383 with a four-barrel carburetor that increased power to 330 hp (250 kW), or they could opt for the 375-horsepower (280 kW) 440 cu in (7.2 L) Magnum RB-block engine. Wagon buyers choosing the 440 got a 350 horsepower (260 kW) version.

The 1969 Monaco offered, as a $50 option, the first modern polyellipsoidal (projector) automotive road lamp. Called "Super-Lite" and mounted in the driver's side of the grille, this auxiliary headlamp was produced in a joint venture between Chrysler Corporation and Sylvania. It uses an 85 watt halogen bulb and was intended as a mid-beam, to extend the reach of the low beams during turnpike travel when low beams alone were inadequate but high beams would produce excessive glare to oncoming drivers.

Available models for 1969 included a two-door hardtop coupe, four-door hardtop sedan, four-door pillared sedan, and four-door station wagons with six- or nine-passenger capacity. A new Brougham option package included a vinyl roof on sedans and hardtops and a split-bench front seat with a reclining mechanism on the passenger side (except on the two-door hardtops). Monaco wagons received woodgrained vinyl trim along their sides and across the dual-action (side- and bottom-hinged) tailgate.

Sales of the Polara and Monaco were down by nearly 20,000 cars compared with 1968, with the Monaco line accounting for 38,566 of the 127,252 full-size cars made by Dodge for the year.

The 1970 models got completely new front and rear styling that included expensive-to-make loop bumpers front and rear. In the front, the new bumper enclosed a new diecast grille and the headlamps. At the rear, the double-loop bumper enclosed the taillamps. Reversing lamps were moved up into the endcaps that terminated the quarter panels, in slotted body-color housings. The designers chose to emphasize the length of the hood this year, which meant that the redesigned front end grew by three inches. However, the new rear end was four inches (102 mm) shorter.

Improvements to the suspension were promoted as the new "Torsion-Quiet" system, which used strategically placed rubber isolators to reduce road noise and vibrations. The rear wheel track was broadened by nearly three inches as Dodge installed the rear axle that had been used only on Wagons on all 1970 Monaco models.

The Brougham and 500 option packages continued, as did the availability of the Super-Lite, but the 440 Magnum V8 was dropped. The 350 horsepower (260 kW) version 440, available only in wagons for 1969, became the new top engine for all Monacos. Despite all of the changes, which cost Chrysler a rather large sum of money, Monaco (and Polara) sales declined with 24,692 Monacos built for the model year.

The 1971 Monaco received a facelift featuring a new grille within the bumper that had been used the previous year, and other minor styling changes that were focused mainly at the rear. The Super-Lite was no longer available because of a lack of consumer interest and challenges to its legality in some states. A new single-loop rear bumper and larger taillamps were installed.

Complete article available at this page.